Technical Requirements For Laying Geotextile

1. Grassroots inspection: Check if the grassroots is flat and solid, and if there are any foreign objects, they should be handled properly without any delay.
2. Trial laying: Based on the on-site situation, determine the size of the geotextile and cut it before trial laying. The cut size should be accurate.
3. Check if the width of the roller is suitable, and the overlap should be flat and moderately tight.
4. Positioning: Use a hot air gun to bond the overlapping parts of the two geotextiles, and the spacing between the bonding points should be appropriate.
5. When stitching the overlapping parts, the suture should be straight and the stitches should be even.
6. After stitching, the geotextile should be checked for smoothness and defects.
7. If there are any unsatisfactory phenomena, they should be repaired in a timely manner.